background image

The Vanguard 

Wireless

HART Gas Detector is simple to set up and operate. 

This card is intended to be a quick start guide. For more details, please refer 

to the installation & maintenance (I&M) manual shipped with the device or 

visit www.ueonline.com/vanguard to download a copy.

Q
G

uide

www.ueonline.com/vanguard                                                                                                 QS_TCD card-01

180 Dexter Ave.,Watertown, MA 02472

uick Start

Mounting Considerations

•  This device should be mounted vertically with the sensor pointing downward.
•  For gases that are heavier than air, it is recommended that the device be 

mounted near the ground below the potential leak source.

•  For gases that are lighter than air, it is recommended that the device be 

mounted above the potential leak source, and if indoors near the ceiling.

•  Mount the device where shock and vibration are minimal.
•  Do not mount in ambient temperatures that exceed the temperature limits 

on the device labeling.

•  Wall mounting could affect the signal strength of the device.

Отзывы: