background image

    Thank you for your purchase. We know that 

you have many brands and products to 

choose from and we are honored to know that 

you have decided to take one of our products 

into your home and hope that you enjoy it.

    Our appliances are designed according to 

the strictest safety and performance standard 

for the North American market. We follow the 

most advanced manufacturing philosophy. 

Each appliance leaves the factory after 

thorough quality inspection and testing. Our 

distributors and our service partners are 

ready to answer any questions you may have 

regarding how to install, use and care for your 

range hood.

    We hope that this manual will help you 

learn to use the product in the safest, most 

effective manner, and care so that it may give 

you the highest satisfaction in cooking for 

years to come. If you have any questions or 

concerns, please contact the dealer from 

whom you purchased it, or contact our 

Customer Support at: 1-888-784-3108.

    The manual also includes directions for the 

professional installer that will install the 

product in your home. We recommend using 

trained personnel for professional installation.

    Please keep this manual for future use.

Thank You

Содержание UC30P



















Отзывы: