7
4. Take the hood unit along with the 6” Round Aluminum duct (Part D). Secure the round alumi-
num duct to the vent hole at the top of the hood unit using HVAC Aluminum foil tape.
5. If mounting to the wall only, drill a 6-1/4” round hole on the back wall above the hood, OR
into the ceiling directly above the hood.
5b. Lift the hood and hang the hood unit on the back wall using the screws drilled in Step 3.
Once the hood is securely hung on the wall, tighten the screws from the interior of the hood.
5c. Pull round aluminum duct through the newly drilled hole in the wall. Plug unit into power
Step 4
Step 5
1. 1. Drill two 8mm holes in position for Wall Anchor (Part B) placement.
(See Page 5 for placement location).
2. Tap Wall anchors securely into each of the drilled holes.
3. After Wall anchors have been tapped in place, Insert 5x50 wood screws, but leave 1/4” of
the screw sticking out of the wall.
(This will give your Range Hood something to hang onto).
Step 1-3
If mounting to a cabinet, skip step 5 and proceed with steps 6-11.
INSTALLATION PROCEDURES
OR
