Installation
Gas Supply Requirements
I t ll ti
f thi
t
f
ith l
l
d
i th
b
f l
l
d
th
Installation of this range must conform with local codes, or in the absence of local codes, than
national Fuel Gas Code, ANSIZ223.1 / NFPA 54. In Canada, installation must conform to the
current natural Gas Installation /code, CAN 1-1.1-M81 and with local codes where applicable.
This range has been design-certified according to ANSIZ21.1-200
5
, latest edition.
MAXIMUM GAS SUPPLY PRESSURE TO APPLIANCE ---14.0 IN.W.C.
MINIMUM GAS SUPPLY PRESSURE TO APPLIANCE ---6.0 IN.W.C.
APPLIANCE REGULATOR IS SET AT 5.0 IN. W.C. OUTLET PRESSURE
Keep appliance area clear and free from combustible materials, gasoline, and other flammable
vapors.
Do not obstruct the flow of combustion air into the range and ventilation air away from the
range.
Ventilation: it is recommended that the unit be set under a powered, vented exhaust hood of
sufficient size and capacity.
Before installing the range, you must locate and secure the included anti-tip bracket to the wall
for your range.
WARNING
!
The use of cabinets for storage above the appliance may result in a potential burn hazard.
Combustible items may ignite; metallic items may become hot and cause burns. If a cabinet
storage is to be provided, the risk can be reduced by installing a range hood that projects
horizontally a minimum of 5” (12.7cm) beyond the bottom of the cabinets.
WARNING
!
WARNING
!
This appliance shall not be used for space heating. This information is based on safety
considerations.
All openings in the wall behind the appliance and in the floor under the appliance shall be
sealed.
4
