Care and Cleaning
Cooktop
•
To avoid electrical shock or burns, turn off all controls and ensure the cooktop is cool
before cleaning.
•
Before cleaning the cooktop, ensure that all burners are turned off and that all
components are cool enough to safely touch.
•
Do not use harsh or abrasive cleaning agents, waxes, polishes, or commercial cooktop
cleaners to clean the cooktop.
•
Use only a sponge, soft cloth, fibrous or plastic brush, and nylon pad for cleaning.
Use only a sponge, soft cloth, fibrous or plastic brush, and nylon pad for cleaning.
•
Always dry components completely before using the cooktop.
Control Panel, Door Handle, Control Housing
•
Clean the control panel, door handle and control housing with a solution of mild
detergent and warm water.
•
Do not use abrasive cleaners or scrubbers; they will permanently damage the finish.
•
Dry the components with a soft lint free cloth
•
Dry the components with a soft, lint-free cloth.
Oven Window
•
Clean all glass surfaces with a solution of mild detergent and hot water. Use a mild
glass cleaner to remove fingerprint or smears.
•
Dry completely with a soft, lint-free cloth.
Porcelain Surfaces
Cl
i t i
d i
d
li
ith
l ti
f ild d t
t
d h t
t
•
Clean oven interior and inner door liners with a solution of mild detergent and hot water.
Rinse and dry with a soft cloth. Do not use abrasives or commercial oven cleaners.
Stainless Steel Surfaces
•
Do not use any cleaning product containing chlorine bleach.
•
Do not use a steel-wool pad; it will scratch the surface.
•
Use a hot, damp cloth with a mild detergent. Use a clean, hot, damp cloth to remove
soap. Dry with a dry, clean cloth.
soap. Dry with a dry, clean cloth.
WARNING
!
Electrical Grounding Instructions:
this indoor gas cooking appliance is equipped
with a three-prong (grounding) plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-pronged receptacle.
Do Not
cut or removes the grounding prong from the plug
Do Not
cut or removes the grounding prong from the plug.
Caution
Label all wires prior to disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper operation after servicing.
15
