8
9
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
C.
Wall Plate Location
Plate position
flat bottom
cabinet
Draw a line on the
back wall equal to the
depth of the front
overhang.
to Cooktop
C
3/8" TO EDGE
NOTE: IT IS V
ERY IMPORT
ANT TO
READ AND F
OLLOW THE D
IRECTIONS
IN THE INSTA
LLATION INS
TRUCTIONS
BEFORE PRO
CEEDING W
ITH THIS
REAR WALL T
EMPLATE.
This Rear Wall T
emplate serves
to position the b
ottom
mounting plate a
nd to locate the
horizontal exha
ust
outlet.
1. Use a level to
check that the t
emplate is positio
ned
accurately.
2. Locate and m
ark at least one
stud on the left
or
right side of th
e centerline.
It is important to
use at least on
e wood
screw mounted
firmly in a stud t
o support the w
eight
of the microwav
e. Mark two add
itional, evenly s
paced
locations for the
supplied toggle
bolts.
3. Drill holes in t
he marked loca
tions. Where th
ere is
a stud, drill a
3/16" hole for w
ood screws. Fo
r holes
that do not lin
e up with a stud
, drill 5/8" holes
for
toggle bolts.
DO NOT INSTA
LL THE MOUN
TING PLATE
AT THIS TIME.
4. Remove the t
emplate from th
e rear wall.
5. Review the In
stallation Instruc
tion book for yo
ur
installation sit
uation.
Locate and m
ark holes to a
lign with holes
in the
mounting plate
.
IMPORTANT:
LOCATE AT L
EAST ONE S
TUD ON EITH
ER SIDE OF
THE CENTER
LINE.
MARK THE L
OCATION FO
R 2 ADDITIO
NAL, EVENLY
SPACED TOG
GLE BOLTS IN
THE MOUNT
ING PLATE
AREA.
Locate and m
ark holes to ali
gn with holes i
n the
mounting plate
.
IMPORTANT:
LOCATE AT L
EAST ONE S
TUD ON EITH
ER SIDE OF
THE CENTERL
INE.
MARK THE L
OCATION FOR
2 ADDITION
AL, EVENLY
SPACED TOG
GLE BOLTS IN
THE MOUNT
ING PLATE
AREA.
Trim the rear w
all template alo
ng the dotted li
ne.
Trim the rear w
all template alo
ng the dotted l
ine.
12"
4"
Darle vuelta a la
hoja para cons
ultar la
versión en Espa
ñol.
3/8" TO EDGE
NOTE: IT IS VER
Y IMPOR
TANT TO
READ AND F
OLLOW THE
DIRECTIONS
IN THE INST
ALLATION IN
STRUCTIONS
BEFORE PR
OCEEDING W
ITH THIS
REAR WALL T
EMPLATE.
This Rear Wall T
emplate serves
to position the b
ottom
mounting plate a
nd to locate the
horizontal exha
ust
outlet.
1. Use a level to
check that the te
mplate is positi
oned
accurately.
2. Locate and ma
rk at least one s
tud on the left o
r
right side of th
e centerline.
It is important to
use at least on
e wood
screw mounted
firmly in a stud
to support the w
eight
of the microwav
e. Mark two add
itional, evenly s
paced
locations for th
e supplied tog
gle bolts.
3. Drill holes in t
he marked loca
tions. Where th
ere is
a stud, drill a
3/16" hole for w
ood screws. Fo
r holes
that do not lin
e up with a stud
, drill 5/8" holes
for
toggle bolts.
DO NOT INSTA
LL THE MOUN
TING PLATE
AT THIS TIME
.
4. Remove the te
mplate from the
rear wall.
5. Review the In
stallation Instru
ction book for y
our
installation s
ituation.
Locate and ma
rk holes to alig
n with holes in
the
mounting plate
.
IMPORTAN
T:
LOCATE AT
LEAST
ONE STUD ON
EITHER SIDE
OF
THE CENTER
LINE.
MARK THE LOC
ATION FOR 2
ADDITIONAL
, EVENLY
SPACED TOG
GLE BOLTS
IN THE MOUN
TING PLATE
AREA.
Locate and ma
rk holes to alig
n with holes in
the
mounting plate
.
IMPORTANT:
LOCATE AT
LEAST ON
E STUD ON
EITHER SID
E OF
THE CENTER
LINE.
MARK THE LO
CATION FOR
2 ADDITIONAL
, EVENLY
SPACED TOG
GLE BOLTS
IN THE MO
UNTING PLAT
AREA.
Trim the rear w
all template along
the dotted lin
e.
Trim the rear w
all template alo
ng the dotted
line.
12"
4"
Darle vuelta a la
hoja para cons
ultar la
versión en Esp
añol.
²
At least 30
″
C
3/8" TO EDGE
NOTE: IT IS VE
RY IMPORTAN
T TO
READ AND FO
LLOW THE DIRE
CTIONS
IN THE INST
ALLATION INS
TRUCTIONS
BEFORE PR
OCEEDING W
ITH THIS
REAR WALL T
EMPLATE.
This Rear Wall T
emplate serves t
o position the bo
ttom
mounting plate a
nd to locate the h
orizontal exhaust
outlet.
1. Use a level to ch
eck that the tem
plate is positione
d
accurately.
2. Locate and ma
rk at least one st
ud on the left or
right side of th
e centerline.
It is important to u
se at least one w
ood
screw mounted fi
rmly in a stud to su
pport the weight
of the microw
ave. Mark two ad
ditional, evenly sp
aced
locations for the su
pplied toggle bolts.
3. Drill holes in th
e marked locatio
ns. Where there is
a stud, drill a 3
/16" hole for woo
d screws. For ho
les
that do not lin
e up with a stu
d, drill 5/8" holes
for
toggle bolts.
DO NOT INSTAL
L THE MOUNTIN
G PLATE
AT THIS TIME.
4. Remove the te
mplate from the r
ear wall.
5. Review the Insta
llation Instruction
book for your
installation situ
ation.
Locate and m
ark holes to align
with holes in t
he
mounting plate
.
IMPORTANT:
LOCATE AT LEA
ST ONE STUD
ON EITHER
SIDE OF
THE CENTER
LINE.
MARK THE LO
CATION FOR
2 ADDITIONAL
, EVENLY
SPACED TOG
GLE BOLTS IN
THE MOUNTIN
G PLATE
AREA.
Locate and ma
rk holes to align
with holes in
the
mounting plat
e.
IMPORTANT:
LOCATE AT
LEAST ONE S
TUD ON EITH
ER SIDE OF
THE CENTER
LINE.
MARK THE LOC
ATION FOR 2
ADDITIONAL, E
VENLY
SPACED TOGG
LE BOLTS IN
THE MOUNTIN
G PLATE
AREA.
Trim the rear w
all template alo
ng the dotted lin
e.
Trim the rear
wall template al
ong the dotted
line.
12"
4"
Darle vuelta a la h
oja para consult
ar la
versión en Españ
ol.
Your cabinets may have decorative trim that
interferes with the microwave installation. Remove
the decorative trim to install the microwave properly
and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth. This
will keep the microwave level.
Measure the inside depth of the front overhang.
Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
For this type of installation with front overhang
only, align the mounting tabs with this horizontal
line, not touching the cabinet bottom as described
in Step D.
Draw a vertical line on
the wall at the center of
the 30
″
wide space.
Tape the Rear Wall
Template onto the wall
matching the centerline
and touching the
bottom of the cabinet.
to Cooktop
Draw a vertical line on the wall at the center of the
30
″
space.
Tape the Rear Wall Template onto the wall
matching the centerline and touching the bottom
C
3/8" TO EDGE
NOTE: IT IS V
ERY IMPORTA
NT TO
READ AND FO
LLOW THE DI
RECTIONS
IN THE INSTAL
LATION INSTR
UCTIONS
BEFORE PROC
EEDING WITH
THIS
REAR WALL T
EMPLATE.
This Rear Wall T
emplate serves to
position the botto
m
mounting plate a
nd to locate the h
orizontal exhaus
t
outlet.
1. Use a level to c
heck that the tem
plate is positione
d
accurately.
2. Locate and m
ark at least one s
tud on the left or
right side of th
e centerline.
It is important to u
se at least one w
ood
screw mounted fi
rmly in a stud to su
pport the weight
of the microwave
. Mark two additio
nal, evenly space
d
locations for the s
upplied toggle bo
lts.
3. Drill holes in th
e marked loca
tions. Where the
re is
a stud, drill a
3/16" hole for w
ood screws. For
holes
that do not line
up with a stud, d
rill 5/8" holes for
toggle bolts.
DO NOT INSTA
LL THE MOUNT
ING PLATE
AT THIS TIME
.
4. Remove the te
mplate from the r
ear wall.
5. Review the Insta
llation Instructio
n book for your
installation si
tuation.
Locate and ma
rk holes to align
with holes in th
e
mounting plate.
IMPORTANT:
LOCATE AT L
EAST ONE
STUD ON EIT
HER SIDE OF
THE CENTER
LINE.
MARK THE LOC
ATION FOR 2 A
DDITIONAL, E
VENLY
SPACED TO
GGLE BOLT
S IN THE MOU
NTING PLATE
AREA.
Locate and ma
rk holes to align
with holes in th
e
mounting plate
.
IMPORTANT:
LOCATE AT LE
AST ONE STUD
ON EITHER S
IDE OF
THE CENTER
LINE.
MARK THE LO
CATION FOR 2
ADDITIONA
L, EVENLY
SPACED TOG
GLE BOLTS IN
THE MOUN
TING PLATE
AREA.
Trim the rear w
all template alo
ng the dotted lin
e.
Trim the rear w
all template alo
ng the dotted lin
e.
12"
4"
Darle vuelta a la
hoja para consu
ltar la
versión en Españ
ol.
cabinet
bottom
with front overhang
Plate position
framed
recessed
Plate position
bottom
1
3
2
300″0
30
cabinet frame.
300″0
30
2″
16-1/2
-beneath
-beneath
-beneath recessed
cabinet
Installation Instructions
ALIGNING THE WALL PLATE
D.
CAUTION:
Wear gloves
to avoid cutting fingers on
sharp edges.
Area E
Hole
A
Hole
B
Centerline
notches
Draw a Vertical Line
on Wall from Center
of Top Cabinet
Draw a horizontal line on wall at the
bottom of “Rear Wall Template”.
Horizontal Line
Horizontal Line
CL
3/8" TO EDGE
%#76+10Ä+(':*#756#ਸ਼+5215+6+10'&1765+&'
4'%1//'0&'&&+/'05+10)4'#5'Ä.#&'0#+49+..
&+5%*#4)'+061*175'5647%674'
/+0+/7/9+&6*4'37+4'&
4'#49#..6'/2.#6'
NOTE: IT IS VERY IMPORTANT TO
READ AND FOLLOW THE DIRECTIONS
IN THE INSTALLATION INSTRUCTIONS
BEFORE PROCEEDING WITH THIS
REAR WALL TEMPLATE.
This Rear Wall Template serves to position the bottom
mounting plate and to locate the horizontal exhaust
outlet.
1. Use a level to check that the template is positioned
accurately.
2. Locate and mark at least one stud on the left or
right side of the centerline.
016'
It is important to use at least one wood
screw mounted firmly in a stud to support the weight
of the microwave. Mark two additional, evenly spaced
locations for the supplied toggle bolts.
3. Drill holes in the marked locations. Where there is
a stud, drill a 3/16" hole for wood screws. For holes
that do not line up with a stud, drill 5/8" holes for
toggle bolts.
016'
DO NOT INSTALL THE MOUNTING PLATE
AT THIS TIME.
4. Remove the template from the rear wall.
5. Review the Installation Instruction book for your
installation situation.
Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.
Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.
Trim the rear wall template along the dotted line.
%
#
$
%
&
(%76176(14*14+<106#.
1765+&'':*#756
%76*1.'6*417)*4'#49#..(14':*#756#ਸ਼
12"
4"
Darle vuelta a la hoja para consultar la
versión en Español.
Draw a vertical line on the wall at the center of the
30" wide space.
NOTE: DO NOT MOUNT THE PLATE AT THIS
TIME.
NOTE:
Holes A and B are inside area E. If neither of
important to have
at least one wood screw
mounted
firmly in a stud
to support the weight of the
microwave.
Set the mounting plate aside
.
1
2
Draw a horizontal line on the wall at the bottom of
“Rear Wall Template”.
Holes A and B are not in a stud, find a stud somewhere
in area E and draw a circle to line up with the stud. It is
3
Find a wall stud in area "E" of mounting plate
Refer to section 1B. Finding the wall studs.
For attaching the mounting plate into stud drill
a 3/16" hole into wood stud. Drill a 5/8" hole for
toggle bolt in 1 other location (Hole A or Hole B)
4
