- 10 -
Assembly Instruction
CABLE DIAGRAMS
After the Machine is assembled, check whether the cable is tensioned. (At correct tension, there should be a
gap of 3-5mm between the Top Plate and the Weight Stack).
If the Cable is slightly loose, adjust it by tightening the Bolt at the top of the weight stack, or screw the M12
nut clockwise, as shown in figure.
If the Cable is very loose, adjust the Pulley to lower position on Pulley plate(#27) or adjust the length of Coil
Chain(#64) using the Snap Link(#63).
Fig.6
Loosen nut and
thread bolt in/out
of top plate to
give the cable
proper tension.
Re-tighten nut.
Screw the nut
clockwise to give
the cable correct
tension.
Содержание CHG-150R
