Cosatto nitty gritty suoa dupa, Руководство пользователя

Страница: 6 / 52

Fitting & Operation information:
Please refer to the following diagrams:
Pushchair 1- Opening:
Release the auto lock (1) on both sides then pull the handles upward (2).
Press down on the locking lever (3) until a ‘Click’ is heard and the secondary lock
bar (4) is locked in place.
Check the chassis has locked in place.
Brake 2- Applying :
3- Releasing :
Front wheel swivel
lock
4- Applying :
5- Releasing :
Handle 6- Raising :
7- Lowering :
Harness 8- Opening :
9- Closing :
10- Adjusting the strap length :
Slide the strap adjustor to suitable length (1, 2 & 3).
11- Adjusting the shoulder strap position :
12- Satisfactory shoulder strap position:
13- Removing :
Push the shoulder strap retainer through the backrest (1).
Push the crotch strap retainer through the seat (2).
Rotate the “C” clip to expose its opening (3) and slide the waist strap out of clip (4).
Refitting is a reversal of this procedure.
Footmuff 14- Fitting:
Open the harness 8 and remove chest pad & headhugger (1).
Push the harness straps through the footmuff & headhugger (2).
Attach the footmuff fabric fasteners to the rear of the backrest (3).
Refit chest pads & headhugger then close the harness.
Backrest 15- Lowering :
16- Raising :
Calf support 17- Lowering :
18- Raising :
Basket 19- Removing :
Refitting is a reversal of this procedure.
Hood 20- Fitting:
Fit the hood around the middle handle (1).
Push the brackets onto the mounts on the chassis (2).
Attach the fabric fasteners to the outside of the seat unit (3).
Fit the rear of the hood behind the backrest and attach the fabric fastener (4).
Attach the straps to the front chassis tubing (5).
21- Opening :
22- Extending :
23- Using the hood pocket :
24- Using the speaker :
25- Using the multimedia device pocket :
26- Removing :
Removal is a reversal of step 20 .
Drinks Holder 27- Fitting: