Cosatto Nitty Gritty Giggle 2, Руководство пользователя

Страница: 7 / 52

Chassis 12- Closing:
Note:
upright recline position.
While pressing the primary release button (1), pull both secondary levers (2) back.
Press down on the handle (3) until the autolock retains the chassis in the folded
position (4).
Fold handle inwards 2 to achieve the most compact fold (5).
Carrycot 13- Preparation:
Remove mattress and liner from carrycot (1).
Unfold both frame bars until they locked into positions (2).
14-
Attach the carrycot handle to the carrycot (3).
There are a set of “D” ring located at the base of the carrycot for the attachment of a
separate safety harness approved to BS EN 13210 should this be required (harness not
supplied). Push the “D” rings through the slots in the liner (4).
15- Fitting:
Note:
Dots are marked on the seat mounts and carrycot mounts (1). These should be on the
16- Removing:
Note:
clear of the chassis.
Carrycot carry
handle
17- Removing:
Carrycot hood 18- Fitting:
19- Adjusting:
20- Removing:
Carrycot apron 21- Fitting:
Removing is a reversal of this procedure.
Fitting & operation information:
Please refer to the following diagrams:
Chassis 1- Opening:
Release the autolock (1) and lift the handle upwards until the chassis locks into position
(2).
Check the chassis has locked in place.
2- Adjusting handle position:
Front wheel 3- Fitting:
4- Removing:
Rear wheel 5- Fitting:
6- Removing:
Brake 7- Applying:
8- Releasing:
Front swivel lock 9- Applying:
10- Releasing:
Basket 11- Removing:
Raincover 22- Fitting:
Removing is a reversal of this procedure.
Seat unit 23- Fitting:
Note:
24- Removing:
25- Adjusting seat unit recline angle:
WARNING:
Never adjust the seat unit with your child
in the seat.
Harness 26- Opening:
27- Closing:
28- Adjusting the strap length:
Slide the strap adjustor to suitable length (1, 2 & 3).
29- Adjusting the shoulder strap position:
30- Removing:
Push the shoulder strap retainer through the backrest (1).
Push the crotch strap retainer through the seat (2).
Rotate the “C” clip to expose its opening (3) and slide the waist strap out of the clip (4).
Bumper bar 31- Fitting:
32- Opening:
33- Removing:
34- Fitting:
Open the harness 26 and remove chest pad & crotch pad (1).
Seat unit hood 35- Fitting:
36- Adjusting:
37- Removing:
Raincover 38- Fitting: