Cortelco C60, Руководство пользователя

Страница: 51 / 84

51
Dial Peer Examples
Web Interface Explanation Example
Set phone number,
Destination, Alias and Delete
Length.
Phone number is XXXT;
Destination is 255.255.255.255
(0.0.0.2) and Alias is del.
Any phone number that begins
with XXX will be sent via
SIP2 after the first several
digits are deleted depending on
the delete length.
Dial “93333”
The SIP2 server will
receive “3333”
This creates a speed dial
function. Dialing “2”, will
cause the entire alias number
to be sent out.
Dial “2”
The SIP1 server will
receive 33334444
Field Name Explanation
Phone number There are two types of matching: Full Matching or Prefix Matching.
In Full matching, the entire phone number is entered and then
mapped per the Dial Peer rules.
In prefix matching, only part of the number is entered followed by
T. The mapping with then take place whenever these digits are
dialed. Prefix mode supports a maximum of 30 digits.
Destination Set Destination address. This is optional. For a peer to peer call,
enter the destination IP address or domain name. To use a dial rule
on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Port Set the Signaling port, the default is 5060.
Alias Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.
Note: There are four types of aliases.
1) Add: xxx – xxx will be dialed before any phone number.
2) All: xxx – xxx will replace the phone number.
3) Del: The characters will be deleted from the phone number.
4) Rep: xxx – xxx will be substituted for the specified characters.
Call Mode Select either SIP or IAX2 protocol.
Suffix Characters to be added at the end of the phone number. This is
optional.
Delete Length Sets the number of characters to be deleted. For example, if this is
set to 3, the phone will delete the first 3 digits of the phone number.
This is optional.