Cortelco C60 Скачать руководство пользователя

Страница: 22 / 84

Use LEFT ARROW or RIGHT ARROW to Enable.

5.4

Ban Outgoing

If this function is enabled, the phone cannot make outgoing calls.

Press Menu ->Features-> Ban Outgoing-> Enter.

5.5

Dial Plan

Press Menu ->Features-> Enter->Dial Plan-> Enter.

The following items in the dial plan can be enabled or disabled: Press # to Send, Timeout

to Send, Timeout, Fixed Length Number, Press # to Do BXFER, BXFER On Onhook,

AXFER On Onhook.

Note:

It is recommended that Dial Plan be configured from the web interface.

5.6

Dial Peer

Press Menu ->Features-> Enter->Dial Peer-> Enter.

Select Add to enter the Edit interface, and input information.

Note:

It is recommended that Dial Peer be configured from the web interface. Refer to

Section 8.3.3.4.

5.7

Intercom

Enables/Disables Intercom calls

Press Menu ->Features-> Enter->Intercom-> Enter.

5.8

Auto Redial

If Auto Redial is enabled, the phone will continue to retry a busy call. The user sets the retry

interval and the number of times to redial. The user is also given the option to activate this

feature on each busy call.

Press Menu ->Features-> Enter->Auto Redial-> Enter.

Use LEFT ARROW or RIGHT ARROW to Enable.

Use UP ARROW or DOWN ARROW to select Interval and Times.

Press Save.

5.9

Call completion

This is similar to Auto Redial except that it detects the state of the called number before

making a new call attempt.

Press Menu ->Features-> Enter->Call Completion-> Enter.

Use LEFT ARROW or RIGHT ARROW to Enable.

Press Save.

Содержание C60





















































































Результаты поиска

Содержание C60

Отзывы:

Похожие инструкции для C60

Бренды по названию

Популярные бренды

Cortelco C60, Руководство пользователя

Результаты поиска

Содержание C60

Отзывы:

Похожие инструкции для C60

Бренды по названию

Популярные бренды