Cortelco C60 Скачать руководство пользователя

Страница: 2 / 84

Safety Notices

Please read the following safety notices before installing or using this phone. They are crucial

for the safe and reliable operation of the device.



Please use the external power supply that is included in the package. Other power

supplies may cause damage to the device, affect the behavior or induce noise.



Before using the external power supply, please be sure it is for use with your power

voltage. Incorrect power voltage may cause fire and damage.



Please do not damage the power cord. If the power cord or plug is damaged, do not use it.

This may cause fire or electric shock.



The power plug should be accessible at all times because this is the only way to remove

power from the device.



Handle the phone carefully. Do not drop it or shake it. Rough handling can cause internal

damage.



Do not install the device in direct sunlight. Also do not put the device on carpets or

cushions, or other poorly ventilated locations. This may cause fire or overheating.



Avoid exposure to temperatures above 40

℃

, below 0

℃

or high humidity. Avoid wetting

the unit with any liquid.



Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. If

cleaning is necessary use a soft cloth that has been slightly dampened in a mild soap and

water solution.



Do not touch the power cord or network cable during a thunderstorm. There is a slight

risk of electrical shock.



Do not attempt to open the device. Consult your authorized dealer for repair.

Содержание C60





















































































Результаты поиска

Содержание C60

Отзывы:

Похожие инструкции для C60

Бренды по названию

Популярные бренды

Cortelco C60, Руководство пользователя

Результаты поиска

Содержание C60

Отзывы:

Похожие инструкции для C60

Бренды по названию

Популярные бренды