Corsa OSMOTIC ZERO, Инструкция по эксплуатации

Страница: 20 / 22

13. TROUBLESHOOTING
A) Contact the authorised technical service
A) Check the general water inlet valve
B) Contact the authorised technical service
C) Change the membrane (authorised technical
service)
A) Connect the mains power
B) Contact the authorised technical service
A) Check the movement of the float
B) Check the outlet pump closure gasket
C) Check the connection of the internal pipes
Contact the authorised technical service
A) Empty the circuit and clean the tank, pipes and
tap.
B) Change the filters
C) Change the reverse osmosis membrane.
Contact the authorised technical service
A) Check the mains pressure
B) Contact the authorised technical service
SOLUTION
A) Defective outlet pump
B) Inlet valve partially blocked
A) Lack of water
B) Inlet valve closed
C) Membrane saturated
A) Power cable not plugged in
B) Defective control circuit
A) The equipment is overflowing
B) Defective o-ring
A) Water stored for too long
B) Tank dirty
C) Filters used for too long
A) The tank is empty
B) The sediment filter is clogged
C) The water circuit is blocked
D) Outlet pump disconnected or
defective
E) Reverse osmosis membrane clogged
F) Water inlet closed
G) Lack of mains pressure
The equipment makes
noise
The equipment works
continually
The equipment has
stopped
The equipment loses
water
Unsuitable flavour
No water comes out of
the tap
SOURCE ANOMALY
20