Corsa OSMOTIC ZERO, Инструкция по эксплуатации

Страница: 17 / 22

12. STEPS FOR THE REPLACEMENT OF FILTERS
1. OPEN THE EQUIPMENT
Open the two white side lids. To do this, press with two hands on each lid (figure 1) and remove them (figure
2).
Figure 1
Figure 3
Figure 5
Figure 2
Figure 4
Figure 6
2. EXTRACTION OF SOCKET FILTERS (SEDIMENTS, ACTIVE CARBON AND MEMBRANES)
Before removing the filters, it is important to place a paper, cloth or absorbent material on the bottom of the
filter to be changed (figure 3), to retain the possible remaining water when it is removed.
Then the quick connect pipe must be disconnected by pressing the clamp of the quick link to the filter (figure
4). This step will only be done in the case of the membranes, since neither the carbon filter nor the sediment
filter carry this connection.
Place the key in the filter and turn it counterclockwise (figure 5) until the arrow indicated on the base of the
filter is in position 1 (figure 6). Then extract the filter (figure 7).
17