manualshive.com logo in svg

CORRECT CRAFT Ski 206, Руководство пользователя, Страница: 77 / 84

Поделиться
Скачать
CORRECT CRAFT Ski 206 Скачать руководство пользователя страница 77

9.2

NAUTIQUE FRIEND PROGRAM

It has been proven that experience and word-of-mouth are important
promotional tools. Enthusiastic boat owners talk to their friends.  Our statistics
reveal that a high percentage of our Nautique owners learned about Correct
Craft through a friend. We want to show our appreciation to these friends. 

One year after the purchase date listed on an owner’s warranty card, we send
a “NEW OWNER SATISFACTION SURVEY”. For the completion and return
of this form, we offer a first anniversary gift of a Nautique Gear T-shirt. It is
our desire to keep in touch with our Correct Craft family of boat owners. We
value our owners’ comments and want to hear about the things we do right
and/or the things we need to improve. One of the questions asked is, “How did
you learn of Correct Craft?” This section adds a statement, “If a friend
influenced you, please list his/her name and address.” From this information,
the President of Correct Craft sends that “Friend” a letter of thanks and a
Nautique Gear hat. 

When a “Friend” appears on our list the second time, indicating success in
encouraging another person to purchase a Nautique, this person receives a
personal thank you letter from the President of Correct Craft with a certificate
to return with the appropriate size indicated, and receive a Correct Craft T-
shirt.

When a “Friend’s” name is presented for the third time, this person will receive
a personal letter from the President of Correct Craft with a certificate for a
Correct Craft polo shirt.

For the fourth and succeeding  times a “Friend’ is listed, a personal letter will
be mailed as well as a certificate for $50 retail value of Nautique Gear item(s).

Tell the story of your experiences with your boat, your dealer, and Correct
Craft. When you are responsible for convincing a non-Correct Craft owner to
buy a Nautique, encourage that new owner to give you credit for that
introduction on his first anniversary survey form.

Ski Nautique 206-July29-2003.qxd  8/6/02  10:06 AM  Page 9.2

Содержание Ski 206





















































































Отзывы:

Нет отзывов