manualshive.com logo in svg

CORRECT CRAFT Ski 206, Руководство пользователя, Страница: 73 / 84

Поделиться
Скачать
CORRECT CRAFT Ski 206 Скачать руководство пользователя страница 73

Chapter 8

C

ORRECT CRAFT LIMITED WARRANTY

(B

OATS AND

E

NGINES AS ORIGINALLY

MANUFACTURED

/

INSTALLED BY

C

ORRECT

C

RAFT

)

The Correct Craft warranty is backed by a family tradition of boat building
experience since 1925.

Lifetime Limited Warranty

Correct Craft, Inc. warrants to the original purchaser of each new Correct
Craft boat that, under normal authorized use, the deck, hull and stringer
system shall remain free from structural defect in material and workmanship
for as long as the boat is owned by the original purchaser.

Transferable Lifetime Limited Warranty

In addition, Correct Craft offers a transferable Lifetime Limited Warranty
covering the deck, hull and stringer system as detailed in the Lifetime Limited
Warranty above.  This policy may be transferred (for a nominal fee) to the
second (2nd) purchaser during a period of five (5) years from the date of
delivery to the original purchaser.  See your local dealer for details.

Exception:  The “Lifetime” and “Transferable” warranties do not cover the
engine, gelcoat nor any other components fastened or applied to the hull or
deck.  Gelcoat discoloration, blisters, or bubbles and cracks are not considered
structural defects.

Five (5) Year Limited Warranty, Non-Transferable

Correct Craft, Inc. warrants to the original purchaser that each new Correct
Craft boat and engine, as originally manufactured by Correct Craft, shall
under normal authorized use be free of defect in material and workmanship for
a period of five (5) years from the date of delivery to the original purchaser.
This coverage applies to factory-installed components including gelcoat
(blisters or cracks if not caused by impact or collision) boat parts, options,
engine, engine parts, or other components not manufactured by Correct Craft,
Inc.  This “Five (5) Year Limited Warranty” shall not apply to normal
maintenance of boat or engine, or any component thereof, including but not
limited to alignment, adjustments, connectors, tune-up and parts,
saltwater/brackish water corrosion, and wear items including, but not limited
to non-skid material, battery, bushings, packing material, belts, bulbs, filters,
seals, gaskets, o-rings, water pump impellers.

Exceptions:  

This warranty shall not apply to...

• Any Correct Craft boat or engine which has been used at any time for

commercial or racing purposes, as a demonstrator or in a promotional

8.1

Ski Nautique 206-July29-2003.qxd  8/6/02  10:06 AM  Page 8.1

Содержание Ski 206





















































































Отзывы:

Нет отзывов