manualshive.com logo in svg

CORRECT CRAFT Ski 206, Руководство пользователя, Страница: 22 / 84

Поделиться
Скачать
CORRECT CRAFT Ski 206 Скачать руководство пользователя страница 22

User tips:

Always return to neutral and let the engine idle for two or three seconds before
turning the engine off  Regularly check the black servo knob on the control
unit to make sure it is turned snugly in a clockwise direction.  To do this, turn
the engine off and lift the top half of the engine box.  Please note, the servo
knob cannot be moved if the engine is on.

Regularly check the set screw on the side of the black knob for tightness.

The boat speed will decrease in sharp turns.  If you are towing skiers, you may
wish to manually increase the throttle or use the DISENGAGE feature to
maintain speed in sharp turns.

When towing wakeboarders, accelerate slightly past desired speed prior to
engaging the speed control.

Standard Faria Instruments

All Signature Series Nautiques feature 5” Faria speedometers and tachometers.
These gauges are white faced with large tick marks for easy reading with high
contrast pointer.  The gauges are paddle wheel driven with potentiometer
adjustments.  Should your boat be packaged as a Limited or Team Edition,
refer to the Faria Serial Bus chapter regarding your speedometer and
tachometer.

1.18

Faria Analog Speedometer

Faria Analog Tachometer

Ski Nautique 206-July29-2003.qxd  8/6/02  10:05 AM  Page 1.18

Содержание Ski 206





















































































Отзывы:

Нет отзывов