2 | CORNING LAMBDA PLUS PIPETTORS
The pipettor design allows the user to lock the volume
setting by sliding the locking ring upwards.
S
S
The symbols printed on the handle show locked and
unlocked positions. The volume range of each pipettor
model is shown on the pipetting pushbutton (A1).
Liquids are aspirated into disposable pipet tips attached
to the pipettor shaft. Disposable pipet tips ensure
maximum safety and eliminate the possibility of cross-
contamination of the liquid samples. To protect the user
from contaminated pipet tips, the pipettor is fitted with a
built-in tip ejector (D).
Single-channel Pipettor Ejector
The ejector length can be adjusted to accommodate all
common brands of pipet tips. When using narrow tubes,
it may be necessary to remove the tip ejector. This is done
simply by pulling down.
Adjusting the Tip Ejector Length
2 to 1,000 μL Pipettors
The “H“ spacers included with
each pipettor, allow the ejector
length to be adjusted by +1 mm
or +2 mm.
An ”H0” spacer is fitted as
standard. The outside shape
of the spacer identifies the
adjustment.
2 and 10 μL Pipettors
The 2 μL to 10 μL pipettors may
require the use of an ejector cap
“M” to efficiently eject certain
brands of pipet tips. Simply
place the cap (supplied with the
pipettor) on the bottom of the
pipettor shaft and slide the cap
upwards until it surrounds the
bottom of the tip ejector.
M
H
