CORNING Lambda EliteTouch, Инструкция по эксплуатации

Страница: 10 / 17

16 – Corning Lambda EliteTouch Pipettors INSTRUCTION MANUAL – 17
Single-channel pipettors 10-100, 20-200 μL (Figure 10B)
• Unscrew the Shaft Cap (M)
• Remove the Plunger (I) with the Seal (P) and pipetting
Spring (N) from the shaft
• Remove the Shaft (J) from the Connecting Bush (L)
• If necessary, remove the Seal (P) from the Plunger (I)
• Check the condition of components, and clean as
recommended
• Replace any damaged parts
• Assemble the components in reverse order
NOTE: When disassembling, care should be taken so
the plunger does not pop out under the action of the
pipetting spring.
J
P
H
P
L
M
N
I
10B