Installation Instructions Suction Line and Service Valve Assemblies
© 2005-2014, Cornelius Inc.
- 9 -
Publication Number: 630460289INS
20. Move the nitrogen feed to the high side
service valve.
21. Remove the suction line (a) from the water
cooled condenser (FIGURE 17).
DO NOT remove the water lines from the
condenser.
WARNING: DO NOT apply excessive heat to
the water side of the condenser. Protect in
the same manner as an expansion valve or
other heat sensitive equipment.
Remove the liquid line (b) from the water cooled
condenser, and the water control valve capillary
(c) from the suction line assembly.
FIGURE 16
22. At the rear of the unit, remove the suction
line (d) from the left evaporator. Do not
remove the line extension (e) (FIGURE
17).
FIGURE 17
a
b
c
d
e
f
g
