Installation Instructions Suction Line and Service Valve Assemblies
© 2005-2014, Cornelius Inc.
- 7 -
Publication Number: 630460289INS
12. Remove the 2 screws connecting the top support brace (a) to the evaporator bulkhead (FIGURE
11).
13. Drill out the rivet attaching the right side panel to the base (FIGURE 12). A 1/8”drill bit is
recommended.
FIGURE 11
FIGURE 12
14. Remove the 5 screws attaching the right side panel to the rear panel (FIGURE 13).
15. Lift and set aside the right side panel, control box, and support brace assembly (a).
16. Remove the 2 screws holding the 2 piping access covers (b) to the wrap panel (FIGURE 13).
FIGURE 13
a
a
X5
b
b
