Cornelius NORDIC ELITE Series, Руководство пользователя

Страница: 19 / 26

Installation Guide and Owner’s Manual
© 2018, Cornelius Inc. - 15 - Publication Number: 548000033
CLEANING INSTRUCTION FOR CORNELIUS CNM
SERIES ICE MACHINES
NOTE: Proper cleaning of an ice machine requires two parts: descaling and sanitizing.
Descaling should be scheduled at a minimum of twice per year but no more than once per month.
Descaling dissolves the mineral deposits on the evaporator and other surfaces. It removes scale, calcium, lime scale
and other mineral buildup. The manufacturer requires a “nickel-safe” cleaner such as Nu-Calgon Nickel-Safe Ice
Machine Cleaner or equivalent diluted per manufacturer’s instructions.
Sanitizing should be performed after each descaling but no more than once per month.
Sanitizing disinfects the machine and removes microbial growth including mold and slime. The manufacturer
requires a “nickel-safe” sanitizer such as Nu-Calgon IMS-III or equivalent diluted per manufacturer’s instructions.
CAUTION
!
Do not mix cleaner (descaler) and sanitizer together.
NOTE: Electrical power will be ON when performing the following cleaning instructions.
1. Remove all ice from storage means to prevent any contamination of ice in storage.
2. Remove the front panel of the ice machine by loosening the two front panel screws with a Phillips head screw-
driver. Lift panel to remove.
3. Press and hold the POWER button for 3 seconds to initiate a harvest cycle (blue light will begin to flash for Manual
Harvest mode). This ensures there is no ice on the plate and the water is emptied from the sump.
Figure 12.
4. Once the ice machine has completed its harvest cycle, the POWER light will go to solid red (OFF mode).
5. Remove the upper evaporator cover and leave the lower curtain.
Figure 13.
Power Button
Clean Button
Top Cover
Evaporator Cover
(Slide up and lift off)