Cornelius FCB 3 H.P. POST-MIX DISPENSER, Инструкция по установке и обслуживанию, Страница: 8 / 78

1
312026000
GENERAL INFORMATION
IMPORTANT: To the user of this manual - This manual is a guide for installing, operating, and maintaining
this equipment. Refer to Table of Contents for page location of information pertaining to questions that
arise during installation, operation, service and maintenance, or troubleshooting this equipment.
Warranty Registration Date
(to be filled out by customer)
Model Number:
Serial Number:
Install Date:
Local Authorized
Service Center:
GENERAL DESCRIPTION
This section gives the description, theory of operation, and design data for the FCB 3 H.P. Two-Flavor Post-Mix
Dispenser with Hot-Gas Defrost and V3+ Features (hereafter referred to as a Unit).
FIGURE 1. FCB DISPENSER
UNIT DESCRIPTION
The Two-Flavor FCB Dispenser (see Figure 1) consists basically of two freeze cylinders each containing an internal
beater driven by an electric motor, one refrigeration system with a 3-horsepower compressor, two carbonated water
tanks which feed both carbonator-blender tanks, a timer-controlled automatic hot-gas defrost system to defrost the
freeze cylinders, and interconnecting tubing, components, and fittings necessary to regulate, transfer, and dispense
product.
The components are attached to a steel frame and are enclosed in a steel cabinet. The cabinet panels are easily
removed to facilitate installation and service and maintenance. A transparent faceplate, with an integral relief valve
and a removable self-closing dispensing valve, is mounted on front of each freeze cylinder. A removable drip tray,
with cup rest, is located directly below the dispensing valves.