Cornelius Cascata180, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 20

© 2017, Cornelius Inc.
- 11 -
Startup and shutdown of the device
1. Turn on the main power switch and open the main valve on nitrogen cylinder.
2. Turn off the main power switch and close the main valve on nitrogen cylinder.
Filling coffee
Pour the pre-prepared cold-brew coffee into washed and clean coffee keg and tighten the lid, and
then secure the nitrogen inlet (white) and pull the pressure relief ring for 1s to complete the process
of coffee filling.
Selling coffee
Connect the body of prepared cold-brew coffee to nitrogen inlet (white) and coffee outlet (black),
and push the body to its place, and now it is ready for dispensing.
Put the cup just under the tap. Press the handle of tap to dispense coffee and restore the handle to
stop dispensing.
Replacing keg
It is possible to prepare another keg of coffee as needed with spare nitrogen lines so that the keg may
be switched at any time during business.
Shutdown at night
Close the cylinder master switch and power switch at night when the business is closed.
Warning - the pre-prepared cold-brew coffee should not contain particles of which diameter is
larger than 0.2mm, or it may cause clogging in the device.