Cornelius 621257142 Скачать руководство пользователя

Страница: 5 / 26

Viper Operator’s Manual

- 1 -

Publication Number: 620073146OPR

SAFETY INSTRUCTIONS

EAD

AND

OLLOW

ALL S

AFETY

NSTRUCTIONS

Safety Overview

•

Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit (decals, labels or laminated
cards).

•

Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regulations before operating this
unit.

Recognition

Recognize Safety Alerts

This is the safety alert symbol. When you see it in this manual or on the unit, be

alert to the potential of personal injury or damage to the unit.

IFFERENT

YPES

LERTS

DANGER

Indicates an immediate hazardous situation which if not avoided WILL result in serious injury, death or equipment damage.

WARNING:

Indicates a potentially hazardous situation which, if not avoided, COULD result in serious injury, death, or equipment damage.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury or equipment
damage.

AFETY

IPS

•

Carefully read and follow all safety messages in this manual and safety signs on the unit.

•

Keep safety signs in good condition and replace missing or damaged items.

•

Learn how to operate the unit and how to use the controls properly.

•

Do not let anyone operate the unit without proper training. This appliance is not intended for use by very young children or infirm
persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

•

Keep your unit in proper working condition and do not allow unauthorized modifications to the unit.

NOTE: This dispenser is no designed for a wash-down environment and MUST NOT be placed in an area where a water

jet could be used.

Содержание 621257142



























Результаты поиска

Содержание 621257142

Отзывы:

Похожие инструкции для 621257142

Бренды по названию

Популярные бренды

Cornelius 621257142, Руководство оператора

Результаты поиска

Содержание 621257142

Отзывы:

Похожие инструкции для 621257142

Бренды по названию

Популярные бренды