Cornelius 220096999 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 32

Cornelius 220096999 Скачать руководство пользователя страница 16

Maintenance

Cornelius Deutschland GmbH

Document no. TD0003100

Version 18/03/2019, Index 0

Installation and service manual Tower
Nueva
14

6

Maintenance

DANGER!

Risk of personal injury and equipment damage due to non-compliance with safety information!

Failure to observe the safety information will result in a risk of bringing about operating conditions at the unit,
which may cause personal injury or equipment damage.
•

Please always strictly observe all safety measures and information/instructions; see chapter 1.

NOTICE!

All installation, maintenance and repair work at the unit is to be carried out by an expert only.

WARNING!

Risk of personal injury and equipment damage due to operation by non-qualified staff!

It is dangerous for non-qualified staff to operate the unit!
•

Service operations on this unit may only be carried out by trained and certified experts who have been
trained in carrying out service operations on this unit.

•

All wiring and plumbing must be carried out in compliance with national and local laws, regulations and
guidelines. Non-compliance with these laws, regulations and guidelines may result in death, serious injury
or equipment damage.

6.1

Maintenance table

NOTICE!

The following table provides information on recommended maintenance intervals to be adapted to the relevant
installation situation.

Interval

Components

Action

Daily

Tower, outside

Perform a visual inspection. See the document
“Tower operator manual”, document no.
TD0003000

Daily

Tower, outside

Clean. See the document “Tower operator manu-
al”, document no. TD0003000

Every 3 months

Tower, inside

Clean the tubes/valves; see chapter 6.2

«
...
14
15
16
17
18
...
»

Содержание 220096999

































Отзывы:

Нет отзывов