Installation/removal
Cornelius Deutschland GmbH
Document no. TD0003100
Version 18/03/2019, Index 0
Installation and service manual Tower
Nueva
8
5
Installation/removal
DANGER!
Risk of personal injury and equipment damage due to non-compliance with safety information!
Failure to observe the safety information will result in a risk of bringing about operating conditions at the unit,
which may cause personal injury or equipment damage.
•
Please always strictly observe all safety measures and information/instructions; see chapter 1.
NOTICE!
All installation, maintenance and repair work at the unit is to be carried out by an expert only.
WARNING!
Risk of personal injury and equipment damage due to operation by non-qualified staff!
It is dangerous for non-qualified staff to operate the unit!
•
Service operations on this unit may only be carried out by trained and certified experts who have been
trained in carrying out service operations on this unit.
•
All wiring and plumbing must be carried out in compliance with national and local laws, regulations and
guidelines. Non-compliance with these laws, regulations and guidelines may result in death, serious injury
or equipment damage.
5.1
Installation location
NOTICE!
Observe all rules and regulations regarding installation rooms and electric connections as applicable in the in-
dividual countries, as well as accident prevention regulations.
WARNING!
Risk of death due to insufficient load capacity!
If the unit is installed in a location with insufficient load capacity, this can result in serious injuries and damages!
•
Install the unit at or on an installation location that offers a load capacity of min. 100 lbs (approx. 45 kg)
remaining for this unit.
NOTICE!
Many units include additional equipment, such as an ice maker. When using additional equipment, it is manda-
tory to check with the equipment manufacturer as to how much additional weight the product can accommodate
while still ensuring safe installation.
The unit must be set up and installed close to an earthed mains socket. The electric circuit must be fuse-protected, and no addi-
tional units or devices must be connected to the electric circuit.
All connections and outlets/drains must comply with the applicable local and/or national and international regulations.