Cormach TOUCH MEC 1000 SONAR, Техническое руководство по обслуживанию, Страница: 12 / 54

Technical Support Manual – 03/2017 Rel. 0 Page 10
4
Press on icon.
5
Example
Example
Lower the wheel guard: the
machine will run a launch and
display shaft RPM. The machine
will spin continuously and the
pick-up signals at the three
attenuation processes
(Attenuation 1, Attenuation 2,
Attenuation 4) will be displayed in
sequence. Each attenuation value
reading must be between
70 ÷
120
(See table T8.2).
This sequence repeats until the
wheel stops spinning when the
wheel guard is raised.
If the value of both or one of the
two pick-ups is 0, check the
connection and change the pick-
up, or both, if necessary.