Cormach TOUCH MEC 100, Руководство по эксплуатации и обслуживанию

Страница: 27 / 57

Use and Maintenance Manual – 08/2018 Rel. 4 Page 22
12
Take off the 50 g weight applied to
the inner side (identified by the
red X in the figure).
By hand, turn
the wheel in
the direction marked by the arrow
until you see 50 g on the right
display.
13
On the outer side of the wheel, at
12 o'clock, apply the 50 g weight.
Lower the wheel guard: the
machine will run a launch.
14
Keep the wheel guard
lowered. The machine will
perform a set of short spins to
calibrate the function of
automatic stop on imbalance
position
(see chapter SWI Stop
the wheel on imbalance )
.
Do not
lift the wheel guard and do
not press on icon
during this procedure.