Cormach TOUCH MEC 100, Руководство по эксплуатации и обслуживанию

Страница: 20 / 57

Use and Maintenance Manual – 08/2018 Rel. 4 Page 15
3
Press on icon.
4
14. OPERATING MODES: NORMAL, SERVICE, STAND-BY
The machine features three operating modes:
• STANDARD mode. This mode is enabled after the machine is turned on and it is possible to perform the wheels balancing;
•
SERVICE mode. In this mode various utility programs are available for setting parameters (such as grams or ounces) or
checking the machine operations (such calibration);
•
STAND-BY mode. After 5 minutes without user activity, the machine automatically switches to STAND-BY mode to reduce
electrical consumption (both with wheel guard raised or lowered). All acquired data and settings are held in STAND-BY
mode. In the SERVICE mode is not possible to switch to STAND-BY mode. To exit from STAND-BY mode choose by any of
the following means:

Touch any position of the monitor;

Turn manually the wheel;

Remove the Distance and Diameter sensor from the rest position;

Pull out the Width sensor from the rest position.