Corinex Powerline Router, Руководство пользователя

Страница: 10 / 21

4. The following screen will appear to inform you that Setup is ready to begin
installing the Setup Tool on your computer. Click “Install“.
2.5 Testing the Setup
To verify that the connection is working correctly, use the standard Ping utility. (in
Windows, click on menu Start ->Run, then write command “ping IPADDRESS -t”, where
IPADDRESS is the IP address of the computer to which the Powerline Ethernet Wall Mount
is connected to, e.g. ping 192.168.4.1 -t . (This command will be stopped by pressing
keys CTRL+C).
•
Ping the IP address of the computer to which the Powerline Ethernet Wall Mount
is connected to. If this fails, there is a problem with the Ethernet network card.
•
Repeat the same process with the other powerline device on the network.
•
If all nodes can ping themselves, try pinging another powerline device on the
network. If this fails, there is a problem with connections on the powerline. Try
to check the connection to the AC outlet, or use a different AC outlet.
Installation Guide
7
Corinex Powerline Ethernet Wall Mount Manual