46
Artiglio 50
- Kit PAX System
ous injury, or even death.
Inflation of tyres for PAX
System wheels
PAX System wheels with full-width and
clipped support
- Ensure that the wheel on which the tyre
cover has been assembled is firmly
blocked on the turntable by means of
the centring handle A - fig.39. Ensure
also that the head unit B (fig.39) is far
from the working area and, if possible,
in the resting position.
- Connect the Doyfe connector to the
inflation tube C (fig.39) on the valve-
stem. Inflate the tyre, pressing pedal E
- fig.40. The tyre cover expands slightly,
bringing the bead to the maximum hook
and perfect seal condition - fig.40a.
- Continue inflating, up to the value recom-
mended by the tyre manufacturer. Do not
be distracted during this operation, and
check the pressure of the tyre continu-
ously on the air pressure visualisation
gauge (fig.41), to avoid excessive infla-
tion.
- Apply the cap to the valve, to protect
the inner mechanism from dust and to
guarantee the air seal.
- Loosen the wheel blocking device, rotat-
ing the handles anti-clockwise - fig.42.
- Press the stops D and manually move
the centring cone away from the rim
- fig.43.
- Rotate the blocking device anti-clock-
wise, to release it from the turntable
- 44a.
- Unthread the device from the rim -
44b.
- Raise the lift and manually position the
wheels on it - fig.45a.
- Lower the lift - fig.45b.
- Remove the wheel from the lift -
fig.45c.
ATTENTION
Under no circumstances must you exceed
the maximum inflation pressure specified
by the tyre manufacturer - risk of damag-
ing the tyre.
39
A
C
B
40
E
