Artiglio 50
- Kit PAX System
43
GB
During the insertion of the support, ensure
that the upper bead does not enter the
seat of the rim where the inflation pres-
sure sensor is assembled, as it would be
damaged.
30
31
Assembling the lower bead
(Common procedure for Pax System with
full-width or clipped support)
- Using the special lever contained in the
Pax System kit, extract the lower bead
from the lower edge of the rim - fig.32.
- Using button A, release the bead breaker
unit - fig.18.
- Using button B, overturn the bead breaker
unit, as shown in fig.19.
- Bring the cylindrical roller onto the lower
part of the tyre.
-
Replace the bead breaker unit in the
working position - fig.20.
N.B.:
For this operation, the fixing position of
the assembly tool is not modified, so it is
pivoted on the bead breaker arm in the
outer hole. Fig. 33
- Hook up the beading belt D to the wheel,
as shown in fig.34.
- Press the roller against the edge of the
rim. Fig.35
- Insert the lower bead in its seat, rotate
the wheel at the minimum speed and,
proceeding gradually, stop before the
belt interferes with the roller.
32
