Corelis BusPro-I, Руководство пользователя

Страница: 134 / 250

120 Bus Traffic Monitor
Other Options – The first preference sets whether or not a prompt to save data pops up whenever the
trace list will be cleared. The second preference allows the Timing display to be locked to the trace
screen (on the first line), rather than aligning with the selected line.
START Hold Time Checking – sets the minimum START hold time value which will be checked against
every transaction. Errors will be flagged for the messages not meeting the specified minimum value.
Formats
This pane enables selection of how a 7 binary bit address representation is formatted for hexadecimal
display (does not apply to 10-bit addresses or to non-hex representations such as symbolic). The FE
format (default) shows the hexadecimal byte value with the 7 address bits left-justified in the byte. The 7F
format shows the 7 address bits right-justified in the byte. In addition, you can disable decoding of 10-bit
addresses in the Monitor trace listing so that all slave addresses are treated as a 7-bit address.
Figure 118. Formats Pane