Page 9
BLUETOOTH DEVICE PAIRING
Pushing the button opens the bluetooth menu. After selecting the device type, the console will show all
available local devices. The display will show the unique console code. Once a device is paired with the
console, the light will stop flashing and remain on to indicate the connection. Visit
for a
list of compatible apps and demonstration video.
ST20
H.I.I.T.
Build A
Workout
Existing
Workouts
Quick
Start
FLOW
Fig. 6
Pairing with Apple Watch
:
OpenHub consoles marked with this icon
have the
capability to connect using Near Field Communication (NFC) with Apple Watch (must be
running WatchOS 4.2 or later and have option
Detect Gym Equipment
set to
On
in Watch settings for
Workout App.)
Pairing with Samsung Galaxy Watch:
OpenHub consoles marked with the Samsung
icon also have the capability to connect with Samsung Galaxy Watch (must be running
software 4.8 or later and have
NFC
set to
On
)
1
.
To connect:
Hold the watch near the
icon on the console (this is where the NFC reader is located). When
the display and watch detect each other, the Bluetooth button on the display will flash and then turn solid blue,
and watch will ask user to confirm connection with the display. Once connection is confirmed by user, it will
finalize and data will begin to pass between console and watch. It is possible to make this connection either
before the workout begins (recommended), or at any time during an active workout. At the end of workout, the
connection will be terminated.
Note:
when Apple Watch is connected to display, the Calories display window will show both Active and Total
Calories per Apple Watch calculations.
1 See
support.corehandf.com/Software
for version numbers and update instructions
