background image

Page 2

Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL 
installation instructions. The Owner’s Manual describes equipment assembly and instructs 
members on how to use correctly and safely.

Read all warnings posted on the machine.

Health related injuries may result from incorrect or excessive use of exercise equipment. 
Core Health & Fitness strongly recommends you to encourage your members to discuss their 
health program or fitness regimen with a health care professional, especially if you or they 
have not exercised for several years, are over 35, or have known health conditions.

WARNING!

 WARNING: 

 to reduce the risk of serious injury to 

persons using this equipment, read and follow all of 
these warnings:

24 in (0.6 m)

Fig. 1

 Required Clearance

1. 

Assemble and operate the unit on a solid level 
surface. Position the machine with a minimum of 
24 inches (0.6 meters) of clearance on one side 
to allow for ease of mounting and dismounting. 
Leave a minimum of 19.7 inches (0.5 meters) 
between two adjacent units. These dimensions 
are the recommended minimum distances.  
 
The actual area for access and passage shall be 
the responsibility of the facility and should take 
into account this training envelope, Americans 
with Disabilities Act Accessibility Guidelines 
(ADAAG) requirements and any required local 
codes or regulations (www.access-board.gov/
ada).

2. 

This equipment is designed for use in a 
commercial gymnasium or health club. To ensure 
the proper use of the equipment in a safe manner, 
all users of the equipment should read this 
manual before using the machine. This machine 
should be made a part of your club training 
program in order that the equipment is used by 
your members in a safe manner as intended. In 
addition to instructing the club members in the 
proper use of the equipment, the club member 
should obtain a complete physical examination 
form their health care provider before beginning 
any exercise program.

3. 

The safety and integrity of this machine can only 
be maintained when the equipment is regularly 
examined for damage and wear and repaired. 
It is the sole responsibility of the owner of this 
equipment to ensure that regular maintenance 
is performed. Worn or damaged parts must be 
replaced immediately or the equipment removed 
from service until the repair is made.

4. 

Do not exceed the maximum allowable weight 
limit of:

• 

350 lbs. (160 kg.)

5. 

Use only replacement components supplied by 
Nautilus®. Substitutes are forbidden and will void 
all warranties. 

6. 

This machine is not intended to be used by 
persons with reduced physical, sensory, or 
mental capabilities or lack of experience and 
knowledge, unless given instruction and under 
the personal supervision concerning use of the 
machine by a person responsible for their safety.

7. 

Keep children away.

IMPORTANT SAFETY INSTRUCTIONS

Содержание Nautilus NP-L3006

















Отзывы: