background image

Page 2

Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL 
installation instructions. The Owner’s Manual describes equipment setup and instructs 
members on how to use correctly and safely.

Read all warnings posted on the machine.

Health related injuries may result from incorrect or excessive use of exercise equipment. 
Core Health & Fitness strongly recommends you to encourage your members to discuss their 
health program or fitness regimen with a health care professional, especially if you or they 
have not exercised for several years, are over 35, or have known health conditions.

WARNING!

IMPORTANT SAFETY INSTRUCTIONS

 WARNING - to reduce the risk of injury to 

person:
1. 

This equipment is designed for use in a 
commercial gymnasium or health club. To ensure 
the proper use of the equipment in a safe manner, 
all users of the equipment should read this 
manual before using the machine. This machine 
should be made a part of your club training 
program in order that the equipment is used by 
your members in a safe manner as intended. In 
addition to instructing the club members in the 
proper use of the equipment, the club member 
should obtain a complete physical examination 
form their health care provider before beginning 
any exercise program.

2. 

This machine is not intended to be used by 
children. It is not intended to be used by persons 
with reduced physical, sensory, or mental 
capabilities or lack of experience and knowledge, 
unless given instruction and under the personal 
supervision concerning use of the machine by a 
person responsible for their safety. Do not leave 
children unsupervised around the machine.

3. 

The safety and integrity of this machine can only 
be maintained when the equipment is regularly 
examined for damage and wear and repaired. 
It is the sole responsibility of the owner of this 
equipment to ensure that regular maintenance 
is performed. Worn or damaged parts must be 
replaced immediately or the equipment removed 
from service until the repair is made.

4. 

All equipment MUST be secured (bolted and 
tightened) to a solid, level surface, using all of 
the anchoring holes provided, to stabilize and 
eliminate rocking or tipping over. Shim any 
mounting surface that does not rest thoroughly 
on the floor using flat washers, DO NOT force the 
foot to contact the ground with anchors. 
 
Fasteners must have a minimum of 500 lbs. 
tensile capacity, be a bolt of grade 2 or better 
and be installed per the bolt manufacturer’s 
specifications. 
 

 

WARNING:

 Due to the wide variety of flooring 

on which equipment may be anchored or installed 
and differences in applicable local building codes, 
Core Health & Fitness is not responsible for any 
damage to the flooring that may result due to 
anchoring or installing equipment to the floor and 
for compliance with local building codes. Only 
licensed contractors or certified installers should 
be used to insure proper anchoring, installation, 
and compliance with local building code.

5. 

Do not exceed the maximum allowable weight 
limit of:

•  350 lbs. (160 kg.)

6. 

Do not over exert yourself during exercise. Stop 
exercising if you feel pain or tightness in your 
chest, become short of breath or feel faint. If you 
feel pain or experience any abnormal symptoms, 
stop exercising and consult your health care 
provider.

Содержание Nautilus Human Sport Freedom Trainer

















Отзывы: