CorDES Proprietary Information
5
1
OVERVIEW
The CorDES Network Adapter (CDNA-041G) provides network packet to serial translation to
facilitate easy integration of two KIV-7M Gryphon or RTN-14 enabled End Cryptographic Units
(ECUs) into modern Ethernet/IP based satellite control networks. Additionally, the chassis
provides rack mount and redundant auto-failover AC/DC power conversion in a high-availability,
compact 2 RU form factor. The chassis mounts in a standard 19-inch telecommunications rack.
The front panel faceplate is easily removed with five thumb screws allowing the ECUs to slide in
through the front of the chassis for easy installation.
The CDNA-041G provides access to all the ECU data and management interfaces via rear
panel cut outs, for a total of 4 Channels. Redundant hot-swappable autosensing power supplies
provide AC to DC conversion. Two rear panel power supply DC connectors provide the power
connections to the ECU Units.
1.1
Reference Documents
This manual references standards, specifications and other documents. The following
documents are applicable when integrating the ECU int the CDNA-041G and overall satellite
control network.
A. CDNA-041G Data Plane Interface Control Document, Rev 2.0
B. CNDA-041G Application Programming Interface
C. KIV-7M Programmable, Multi-Channel Encryptor, Installation, Configuration and
Operating Instructions
1.2
Specifications
Feature
Description
Data Interfaces
2x Plain Text 1GbE TCP/IP Network Interfaces
2x Cipher Text 1GbE TCP/IP Network Interfaces
(Optical 1000Base-LX or Copper/RJ45)
ECU Crypto Modes
ECB, GCM, CTR
Device Management
10/100/1000 (Base-T) Remote Management
Control/Statistics
ARP/ICMP/DHCP
Static or Dynamic IP per Port
Packet Counters/Statistics per Port
Upgrade
USB Port for future software upgrade support
Physical
2 RU, 19” rack mount
150w Max Power Consumption
Redundant Hot Swap Power supplies
120-230VAC 50-60Hz Auto-Switching Power inputs
0-30C Operating Environment
0-30C MTBF (250KHrs)
