Corbin Russwin ASSA ABLOY Museo MP6600 Series, Руководство по установке

Страница: 4 / 8

4
MP6600 Series
Installation Instructions
Multi-Point Lock
FM526 03/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
3 Installation
a Change Hand of Lock
Note:
Red surface of locking piece must face secure
(keyed/locked) side of door.
To rotate locking piece:
1. Position lockbody with red surface of locking
piece visible.
2. Insert blade type screwdriver into locking
piece slot to rotate locking piece.
3. Push locking piece toward back of lock body
and rotate 180° until RED surface shows on
opposite side.
Note:
Red color indicates locked side of door.
Figure 2
b Change Hand of Latch
Note:
Beveled surface of latch must face strike. Deadlatch is self-adjusting.
To change hand of latch:
1. Insert flat blade screwdriver into spade
shaped slot. (Figure 4)
2. Rotate screwdriver 90° to push latch out until
back of latch clears lock front; rotate latch
180°. Latch will re-enter lockbody.
Figure 3
Lock Front
Latch
Figure 4
Figure 5
Door Handing
Inside
Outside
Left Hand
Left Hand
Reverse Bevel
Right Hand
Right Hand
Reverse Bevel
Outside
Door hands determined from outside (Secured/Keyed side)
Inside