6
MP6600 Series
Installation Instructions
Multi-Point Lock
FM526 03/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Instructions for MP6600 Series Multi-Point Lock (continued)
12. Align posts in rose with holes in adapter and plate
assembly, and press on until rose is tight against
door face.
13. Attach inside lever and secure with
1/8" Allen wrench.
14. Assemble thumbturn/emergency release
(if provided) according to instructions on bag.
15. Check for proper lock operation by function
prior to closing door.
16. Tighten two lockbody screws completely.
17. Attach outside front with two (2) #8-32 x
1/4" flat head screws.
d
Instructions for CE, RE1, and L Escutcheons
Through-bolt the inside escutcheon to the outside
escutcheon with two screws #8-32 x 1-7/8".
Notes:
• Screw heads should be visible on inside escutcheon.
• Removable core or interchangeable core cylinders require
a control key (a key stamped with "C") to remove and install
the inner cylinder core. This is not standard;
must be requested separately. If requesting 1-bitted control key,
specify 113511 cut.
• Cylinder collar(s) are required for functions with two (2) cylinders or
cylinders longer than # 41 (1-1/8"). (Figure 9)
10
9
12
Figure 8
Inside of Door
Outside of Door
Figure 9
