Set Time.
Press the set button. The TIME should now be flashing, use
the up and down arrows to set the correct time of day
(24hrs format). Once the correct time has been selected,
press the set button to confirm. The following will then be
displayed.
Set Day of the Week.
Press the set button to display the screen shown. The
display will flash, use the up and down buttons to advance
the arrow to underneath the correct day. Once under the
correct day press the set button to confirm. The following
will then be displayed.
Salt Setting
The system should have been pre-programmed to the
required setting but may need altering or resetting,
the default amount is 110 grams/Ltr.
To reset this press the set button to start the display
flashing and adjust the setting using the up and down
arrows to the correct setting (see 5.2)
On the 740 & 760 control you have options of S, L or H.
Time when system Regenerates.
This normally defaults to 2.00am but can easily be changed
to a more suitable time if required by pressing the square
set button to start the display flashing, adjusting the time
using the up and down arrows then press the square set
button to confirm. The following will then be displayed.
Calendar Override Days.
The system should have this pre-programmed to a
suggested number of days but this may need altering to suit
your needs. This function allows the filter bed to backwash
regardless of usage; this is to ensure that the filter bed
remains fresh.
Press the set button to start the display flashing then alter
the figure using the up and down arrows, then press the set
button to confirm the setting.
740 & 742 (Time) Controllers rely totally on this setting.
