Copa Multi Naya 12, Руководство пользователя

Страница: 66 / 92

64
USER'S MANUAL
First make changes to wall and make sure that is hard and
secure. Using four"+" type screws to fasten the installation
board onto the wall. Keep it water lever horizontal direction
and perpendicular in vertical direction. Otherwise it might
cause water drops when air-conditioner is running cooling
operation.
Pull out the indoor unit pi pes after detached the fixed parts on them. Connect the
interconnected pi pes to the indoor unit: point to the center of pipe and fasten the
connection screw at first by hand and then by wrench until you hear the "Click" sound.
Fastening direction is shown in the right picture. Using torque is shown in the
following table.
Drilling 70mm diameter pipe hole at
the left down or right down side of
the installation board. The hole
shall si ant outward slightly.
Before installation, confirm connection
pipes' direction.Remove the board 1
and board 2 on the correct connecting
side. Press connection pipes to the
board gap, then install board 2 to the
original location. lf connection pi pes
are on the other side, install them as
above.
Note : The installed air-condi-
tioner won't be tightly appres-
sed to the wall if that is not
arranged shown in the picture.
The outflow tube must be in
the bottom and the highest
point of it can not exceed the
position of water basin.
Wall-mounted Air Conditioner Unit