20
ALL ABOUT IMAGE RECOGNITION & PROCESSING
15-VP16-HDD2 & 15-VP16-CDRW
3. Operation
5. SET TIME/DATE
Sets Year/Month/Day/Hour/Minute/Second.
Using [Up] and [Down] buttons, move to menu item,
and change value using [Left] and [Right] buttons.
SET TIME/DATE
YEAR
MONTH
DAY
HOUR
MINUTE
SECOND
SELECT
↑↓
, PRESS
←→
SYSTEM SETUP
CAMERA SETUP
TIME/DATE SETUP
RECORD SETUP
HDD MANAGEMENT
MISCELLANEOUS SETUP
TCP/IP SETUP
FACTORY DEFAULT
6. RECORD SETUP
Setting for recording
a. Press [MENU] button and enter password and press
[ENTER] button to enter into main SETUP menu.
In the main SETUP menu, select RECORD SETUP.
Default password set by manufacturer is
“
1
”
, therefore
just press [NUMBER] button for
“
1
”
after you press
[ENTER] button to enter into main SETUP menu.
b. Select RECORD TYPE.
-TIMER : Recording at a certain time interval (DEFAULT)
-MOTION : Recording when a motion detected
-ALARM : Recording when an alarm is activated
c. Decide to overwrite or not when HDD is full.
-OFF : Stop recording when HDD is full.
-ON : Overwrite when HDD is full (DEFAULT).
d. Total recording rate (Fields/sec)
-1/1X : Records at maximum rate/60(50) Fields/sec in total
( FACTORY DEFAULT)
-1/2X: Records at half of maximum rate/
30(25) Fields/sec in total
- Possible to set from 1/1X to 1/999X.
-
If you set at 1/480X, it corresponds to 960 hours recording mode in Time Lapse VCR.
e. REFRESH RATE : In Motion or Alarm recording mode, system records pictures at a certain time
interval (REFRESH RATE) even though there is no motion detected or alarm activated.
-20 SEC : Records pictures from all channels at time interval of 20 sec, regardless of motion detected
or alarm activated.
f. DURATION : Records for DURATION time when a motion is detected or an alarm is activated.
- 20 SEC : Records pictures from a channel where motion is detected or alarm is activated, for 20 sec.
- 1 SEC : FACTORY DEFAULT
g. EVENT OFF TIMER : To limit numbers of motion detected, alarm activated or video loss to be enlisted to event
list, we set EVENT OFF TIMER.
- 60 SEC : Just in case time interval between previously detected motion (alarm or loss) and currently detected
motion (alarm or loss) is longer than 60 sec, currently detected motion(alarm) is enlisted in event list.
60 SEC is FACTORY DEFAULT.
- EVENT OFF TIMER is to protect event list from being filled with motion, alarm, or video loss detected very
frequently. If time interval between previous motion(alarm or loss) and current motion(alarm or loss) is
shorter than set EVENT OFF TIMER, motion, event, or video loss is not enlisted in event list, but
recording is done as set(if it is set at Motion recording or Alarm recording).
Display of RECORD SETUP
RECORD SETUP
RECORD TYPE
OVERWRITE
TIME INTERVAL
EVENT OFF TIMER
REFRESH RATE
DURATION
: TIMER
: OFF
: 1/1X
: 60 SEC
: _ _ _ _ _ _
: _ _ _ _ _ _
SELECT
, PRESS
Display of SET TIME/DATE
