COP Security 15-CD35F, Руководство по установке

Страница: 5 / 12

5
12Vdc Connection.
The terminal block is clearly marked for +ve and -ve connections. Please observe polarity
when making dc connections.
The DC Jack accepts 2.1mm DC power plugs with centre pin positive.
24Vac Connection.
Since the power is 24V AC (alternating current), the connections to the terminal block can
be made either way round.
When the fi xings and connections have been made, the camera functions
need to be set-up to complete the installation. (see page 8)
INSTALLATION - wiring directly to the camera
Loosen the three security screws on the
cover of the dome housing using the Allen
key provided.
Stick the drilling guide template provided
to the wall or ceiling where the camera is to
be sited.
Drill three holes for the plastic “wall plugs”
then insert the wall plugs.
Drill the hole for the cable entry.
Please ensure the wall or ceiling on which the unit is to be mounted is of suitable strength
to support the weight of the unit.
Use only Class 2 indoor/dry or Class 3 outdoor/wet power supplies. (depending on the
installation environment).
Since the PSU supplying the camera will be running continuously, it is recommended to use
a PSU that is rated to supply at least 25% higher than the maximum current required by the
camera. (see Specifi cations at the back of this manual for individual camera requirements).
Loos
1
Stick
2