COP Security 15-CD35F, Руководство по установке

Страница: 7 / 12

7
POWER
(Orange)
12Vdc Connection.
If a dc supply is used this must be regulated.
The terminal block is clearly marked for the 12v positive (P+) and 0v (P-) connections.
Please observe polarity when making dc connections.
24Vac Connection.
Since the power is 24V AC (alternating current), the connections to the terminal block can
be made either way round.
Video Connection.
It is recommended you use an RG59 or twisted pair cable to bring the video signal back
from the camera to the DVR/monitor/mux etc.
The Video out from the camera requires two connections.
When using a coax cable such as RG59, the inner core provides the “Video” connection
(V+) and the outer braid of the coax is used for the 0V GROUND (V-) connection.
When the fi xings and connections have been made, the camera functions
need to be set-up to complete the installation. (see page 8)
Connections
The camera is provided with two
2way Plug-on screwed terminal
blocks.
A 2way block for the Power
connection. (Orange).
A 2way block for the video
connection. (Green).
V+ V-
+ P - P
VIDEO
(Green)
Use only Class 2 indoor/dry or Class 3 outdoor/wet power supplies. (depending on the
installation environment)
Since the PSU supplying the camera will be running continuously, it is recommended to use
a PSU that is rated to supply at least 25% higher than the maximum current required by the
camera. (see Specifi cations at the back of this manual for individual camera requirements).
The c
6