Cooper CFDAU30, Руководство по установке и обслуживанию, Страница: 14 / 18

PR000-00-527-01 PINSTCFDAU30
Page 14 of 18
Fire Alarm Interface
An innovation which combines the Cooper analogue addressable Fire
detection and alarm functionality with very sophisticated cause and effect
program with the latest voice alarm address technology.
Up to 20 CFDAU30 per loop with build in amplifier can be connected to any
Cooper addressable Fire Panel.
CFDAU30 has build in isolator and can be hard or soft addressed by the
Cooper addressable panels
CFDAU30 is fully monitored and controlled by any Cooper Fire addressable
Fire Panels.
NOTE! M
ESSAGES WILL ALWAYS PLAY TO THE END OF THE CURRENT CYCLE
WHEN
RESET,
THIS IS A REQUIREMENT
,
NOT A FAULT
Loop Connections
Interface Board
Display/Main board
Loop Inputs
Carefully remove the display/main board by removing and retaining the four screws securing it to the
metal casing, allowing access to the Interface board behind. Wire the loops to the Interface board as
described in the diagram on the following page.