9
Cooper Tools GmbH, Carl-Benz-Str. 2, 74354 Besigheim, P.O. Box 1351
Germany, Tel: (07143) 580-0, Fax: (07143) 580108
5.3
Commissioning the digital camera (only CX camera series)
A connected FireWire camera is automatically detected and initialised by the software. The following choice
is only valid for a connected camera of the CX series.
The first time the program is started, there is no
camera set up for image acquisition. Using the
Special command, you can choose the camera
type in the Settings dialog box. To open (initialise)
the camera, you must make mark it (with a blue
background) on the list and click the "OK" button.
The selected camera is then always opened each
time the program is started.
Following camera types are supported:
CX05c
Colour Digital camera with standard resolution
CX13c
Colour Digital camera with high resolution
For information on the installation of the camera, see section 4.4.
5.4
Description of the menu bar and the toolbar
5.4.1 Menu bar
Component Library
New
Opens the New Component dialog box in which you can configure a new component.
Package dimensions
Pitch
Number of soldered connections in x and y
Ball diameter
Pad dimensions on the circuit board
Rotation of the component
Line width of the frame in pixels
Component name
"
Save saves the values for a new
component
"
Cancel interrupts the function
"
OK" accepts the settings and opens
the component.
