Cooper Security i-dig02, Руководство по установке

Страница: 5 / 8

i-dig02
Page 5
The person connecting the i-dig02 module to the PSTN must be
suitably qualified. Connect the i-dig02 telephone connector (see
Figure 5) ONLY to the PSTN or to other circuits designated as
Telecommunications Network Voltage.
Programming
For details on programming the i-dig02 please refer to the
i-on40 Programming Reference Guide. All the options necessary for
programming the module are in the Installer Menu under the
Communications – ARC Reporting option.
Note: The control unit hides the Communications - ARC Reporting
option if there is no i-dig02 fitted.
Finishing the Installation
Once programming is complete:
Re-fit the lid of the end station.
Test the module using the options in the
Installer Menu - Test
option.