Cooper safety CEAG 1903 LED CG-S, Монтаж и эксплуатация, Страница: 10 / 12

CEAG Notlichtsysteme GmbH 10
Mounting and Operating Instructions
1903 LED CG-S
6 Transport, Packaging and Storage
6.1 Safety Notes
Attention! Damage to property!
The luminaires will be destroyed or damaged by improper transport!
6.2 Transport inspection
Check delivery on receipt for completeness and for transport damages, immediately. If external
damage is detected do not accept the delivery, except under protest.
6.3 Packaging
If no return - agreement exists for packing material separate it according to type and size for
further use.
Attention!
Packing material has to be recycled in an environmentally friendly way and according to the
local provisions governing disposal. If necessary, commission special recycling company.
6.4 Storage
Keep packages closed up to mounting and observe the external arrangement and
storage notes. Store packages under the following conditions:
- not to be stored outside
- keep dry and dust-free
7 Mounting
7.1 Safety Notes
For the mounting and operation of electrical apparatus, the respective national safety
regulations as well as the general rules of engineering will have to be observed.
7.2 Installation
Press the snap hooks together by help of a suitable screw
driver and pull the cover of the luminaire down.
Remove LED-strip out of the corresponding holder by
uncompressing the holders with the fingers. Now fix the
mounting plate to the wall / ceiling at the two fixing holes with
suitable screws.