Cooper Power Systems Kyle Type ME Series, Инструкция по техническому обслуживанию, Страница: 40 / 50

Catalog No. Description
KA1037ME6S Instantaneous Trip—Phase and Ground. Phase
Multiple of 1.4, 2.0, 2.8, 4.0 or 5.6; Ground
Multiple of S.6, 8.0, 11.2, 16.0, or 22.4
KA1037ME7S Instantaneous Trip—Phase and Ground, Phase
Multiple of 5.6, 8.0, 11.2, 16.0, or 22.4: Ground
Multiple of 1.4, 2.0, 2.8, 4.0, or 5.6
KA1037ME8S Instantaneous Trip—Phase and Ground, Both
With Multiples of 5.6, 8.0, 11.2, 16.0, or 22.4
KA1102ME1 Standard Input Plug Board and Harness for
Form 3A
KA1103ME Tie Board, Form 3A
KA1109ME8 Standard Charger Board—120-Vac, F3A Only
KA1109ME9 Standard Charger Board—240-Vac, F3A Only
KA1134ME1S Automatic Resetting Fault Indicator Circuit Board
KA1137ME1S Annunciator—Type Target Accessory—Auto
Reset, Phase only; Above 14450
KA1137ME2S Annunciator—Type Target Accessory—Auto
Reset, Phase and Ground; Above 14450
KA1141ME1 Selector Switch and Wire Pistol Grip, Form 3A
only
KA1142ME3 Shelf Battery Charger, Portable
KA1159ME Ground Trip Sequence Selector Switch—Form
3A only
KA1160ME Operations to Lockout Sequence Switch—Al1
Controls
KA1163MES Minimum Response Time
KA1174ME1S Temperature Regulated Battery Charger Accy.—
120-Vac, for F3A 26000 and Above
KA1174ME2S Temperature Regulated Battery Charger Accy.—
240-Vac, for F3A 26000 and Above
KA1193ME Harness only for Standard Input Plug Board
for F3A
KA1194ME1 Standard Input Plug Board only for Form 3A
KA2003MES Remote Close With Cold-Load Pickup
KA2035ME2S Remote Non-Reclose and Ground Trip Block—
Maintained Contact, 24V
KA2039ME1S Recloser Status—Without Indicator Lamps
KA2039ME2S Recloser Status—With Indicator Lamps
KA2047MES Battery Monitor—over 30-Vdc/Under 22-Vdc
Indication
KA2070ME1S Remote Close With Cold Load Pickup Remote
Lockout and Status—Without Indicator Lamps
KA2070ME2S Remote Close With Cold Load Pickup Remote
Lockout and Status—With Indicator Lamps
KA2071ME1S Remote Non-Reclose and Ground Trip Block—
Pulse Contact, 24V
KA2072MES Battery Monitor—Analog
KA2189MES Remote Indication of Fault Target Accessory
KP457ME Mounting Strip (Conducting)
KP483ME1 Trip Resistor Clamps
KP509ME Mounting Strip Insulating
KP674ME1 Sequence Relay—for Form 3 and 3A
KP884ME Circuit Board Shield
KP894ME1 Battery Mounting Bracket, Form 3 and 3A
KP953ME Panel Locking Spring
KP1077ME1S Cover
KP1100ME Fuse Block Single Section
KP1110ME Fuse Block End Closure Unit
KP1139ME1 Flip Disc Target—Complete
KP2069A4 Knob for Number of operations Selector
Switches (Ground, Phase or Lockout)
KP2069A8 Manual Control Switch Handle
KP2075A2 2 Amp Fuse—Type AGC, Glass Tube; Min.
Qty. 5
KP2075A4 3/4 Amp Fuse, Type AGX
KP2075A13 15 Amp Fuse—Type BAN, Fibre Tube; Min.
Qty. 5
KP2075A18 3/8 Amp Fuse, Slow Blow Type MDQ, Min. Qty. 5
KP2075A19 6 Amp Fuse, Type BAN
KP2080A1S Plastic Battery Connector—Male, Battery
Connechon
KP2080A2S Plastic Battery Connector—Female, Control
Connection
KP4060A12 120 Volt Relay, 2 to 60 Sec.
KP4060A22 28 Volt Relay, 2 to 60 Sec.
KP4061A3 28 Volt Relay, 0.15 to 1.0 Sec.
K721525105018A Screw—for Trip Resistors Clamps
K999904310283A Bulb—24V, for Lockout Indicator
Type ME Electronic Recloser Control
40
TABLE 17
Type ME Control Replacement Parts Acessories
Form 2 (Above S/N 1900), Form 3 (Above S/N 4000), Form 3A (Above S/N 26000) (continued)
Catalog No. Description
KA716ME Reclosing Fuse Replacement Kit
KA719ME 120-Vac Surge Protection Field Kit
KA720ME 240-Vac Surge Protection Field Kit
KA721ME Battery Post Installation Kit, 4000 and Above
KA734ME1 48-Vdc Supply Adapter (AEP only 15 Amp)
KA734ME2 125-Vdc Supply Adapter (AEP only 5 Amp)
KA734ME3 125-Vdc Supply Adapter (AEP only 5 Amp)
KA734ME4 48-Vdc Supply Adapter (15 Amp) from 5501 Thru
25999
KA734ME5 125-Vdc Supply Adapter (15 Amp) from 5501
Thru 25999
KA734ME6 125-Vdc Supply Adapter (15 Amp) from 5501
Thru 25999
KA734ME10 48-Vdc Supply Adapter (15 Amp) 26000 and
Above
KA734ME11 125-Vdc Supply Adapter (5 Amp) 26000 and
Above
KA734ME12 125-Vdc Supply Adapter (15 Amp) 26000 and
Above
KA734ME13 48-Vdc Field Kit for DC Supply—15A 240-Vac
F3A
KA734ME14 125-Vdc Field Kit for DC Supply—5A 240-Vac
F3A
KA734ME15 125-Vdc Field Kit for DC Supply—15A 240-Vac
F3A
KA735ME Battery Bracket Mounting Kit for GE Batteries in
Controls Below 15000
KA736ME Conversion Kit to Cold Load Pickup from Form 3
to Form 3A
KA741 ME4 Retrofit Kit for Replacing Demand Meters—With
Instantaneous Indicating Elements Below
35909
KA741 ME5 Retrofit Kit for Replacing Demand Meters—
Without Instantaneous Indicating Elements,
Below 35909
KA746ME Battery—24V, for Form 2
KA835ME901 Phase Trip Sequence Selector Switch
KA835ME902 Phase Trip Sequence Selector Switch—for Use
With Sequence Coodination Accessory
KA852ME2S Standard Heater—240V
KA871ME2 Battery Charging Isolation Transformer
KA1000ME1S Minimum Trip Doubler—Local Operation—
Phase only
KA1000ME2S Minimum Trip Doubler—Local Operation—
Phase and Ground
KA1002ME4S Minimum Trip Doubler—Remotely operated
KA1002ME5S Minimum Trip Doubler—Three Wire Control to
Double Return
KA1004MES Remote Trip Accessory Kit
KA1021 ME4 Protective Accessory Field Kit for Ground Trip—
4000 to 50071, Supersedes KA921 ME4
KA1021 ME5 Protective Accessory Field Kit for Phase Trip—
4000 to 50071, Supersedes KA921 ME5
KA1021 ME6 Protective Accessory Field Kit for Phase and
Ground Trip—4000 to 50071, Supersedes
KA921 ME6
KA1030ME2S Fault Indicator—Counter Type Phase and
Ground, Above 14450
KA1036ME1S Instantaneous Lockout—Phase only, Multiple
of 1.4, 2.0, 2.8, 4.0, or 5.6
KA1036ME2S Instantaneous Lockout—Phase Only, Multiple
of 5.6, 8.0 11.2 16.0 or 22.4
KA1036ME5S Instantaneous Lockout—Phase and Ground,
Both With Multiples of 1.4, 2.0, 2.8, 4.0, or 5.6
KA1036ME6S Instantaneous Lockout—Phase and Ground,
Phase Multiple of 1.4, 2.0, 2.8, 4.0 or 5.6;
Ground Multiple of 5.6, 8.0, 11.2, 16.0, or 22.4
KA1036ME7S Instantaneous Lockout—Phase and Ground
Phase Multiple of 5.6, 8.0, 11.2 1 6.0 or 22.4
Ground Multiple of 1.4, 2 0, 2.8, 4.0 or 5.6
KA1036ME8S Instantaneous Lockout—Phase and Ground,
Both With Multiples of 5.6, 8.0, 11.2, 16.0, or
22.4
KA1037ME1S Instantaneous Trip—Phase only, Multiples
of 1.4, 2.0, 2.8, 4.0 or 5.6
KA1037ME2S Instantaneous Trip—Phase only, Multiples
of 5.6, 8.0, 11.2 16.0, or 22.4
KA1037ME5S Instantaneous Tr;p—Phase and Ground, Both
With Multiples of 1.4, 2.0, 2.8, 4.0 or 5.6